DC GAMESHARK INFO         

SWAP TRICK TO PLAY JAPANESE GAMES ON YOUR U.S. DC &

     U.S. GAMES ON YOUR JAPANESE DC!!     

All you have to do is put the gameshark cartridge in port 2 & put the GameShark disc in.

Turn on the power. Then select start game. At the prompt, open the drive door and swap disks. Then close the door and start the game!

NOTE: Some After Market Controllers Will Not Work With The DC GameShark!

Sent In By: Chris Lee Hiei45@aol.com

This will also work with a Japanese system in the opposite fashion & will allow you to play U.S. games on a Japanese system! Follow the same procedure as above.

By: Joe Endy

OTHER INFO:

• If you let the Gameshark menu screen on & watch closely, Gina will blink her eyes! Nothing useful......just interesting!

• You can't swap info from the Gameshark memory card to another memory card.

• You can only insert the Gameshark memory card into port 2. The build of the card will not allow you to insert it into port 1!

• The Gameshark memory card has 200 blocks of memory....what do we do when we use that up?

• You may use controller port 2 on your DC system to put the controller with the Gameshark mem card in! This way....you can use your favorite controller with mem card & jump pack in port 1!

DC GAMES THAT DO NOT WORK WITH THE SWAP TRICK:

GAME TITLE:

• 4 Wheel Thunder U.S.

• Tony Hawk U.S.

SYSTEM TESTED ON

Japanese

Japanese

HERE IS A LIST OF CONTROLLERS I TESTED FOR COMPATIBILITY:

-Quantum Fighter Pad - NO

-Nyko Dream Master - YES

-Mad Katz - YES

-Astro Pad - NO

-Ascii Pad FT (Fighting Type) Import - YES

- Electronics Bout. Brand Controller - NO

-Official Sega Brand Controller - YES

* Kind of funny that ALL the Interact brand controllers do not work with the DC Gameshark & they are made by the same company!!??

*IF ANYONE FINDS ANY OTHER GAMES & CONTROLLERS THAT DO NOT FUNCTION PROPERLY, DROP ME AN E-MAIL & I WILL POST IT!